Optimizing the Delivery of mRNA to Mesenchymal Stem Cells for Tissue Engineering Applications.

Messenger RNA (mRNA) represents a promising therapeutic tool in the field of tissue engineering for the fast and transient production of growth factors to support new tissue regeneration. However, one of the main challenges to optimizing its use is achieving efficient uptake and delivery to mesenchymal stem cells (MSCs), which have been long reported as difficult-to-transfect. The aim of this study was to systematically screen a range of nonviral vectors to identify optimal transfection conditions for mRNA delivery to MSCs. Furthermore, for the first time, we wanted to directly compare the protein expression profile from three different types of mRNA, namely, unmodified mRNA (uRNA), base-modified mRNA (modRNA), and self-amplifying mRNA (saRNA) in MSCs. A range of polymer- and lipid-based vectors were used to encapsulate mRNA and directly compared in terms of physicochemical properties as well as transfection efficiency and cytotoxicity in MSCs. We found that both lipid- and polymer-based materials were able to successfully condense and encapsulate mRNA into nanosized particles (<200 nm). The overall charge and encapsulation efficiency of the nanoparticles was dependent on the vector type as well as the vector:mRNA ratio. When screened in vitro, lipid-based vectors proved to be superior in terms of mRNA delivery to MSCs cultured in a 2D monolayer and from a 3D collagen-based scaffold with minimal effects on cell viability, thus opening the potential for scaffold-based mRNA delivery. Modified mRNA consistently showed the highest levels of protein expression in MSCs, demonstrating 1.2-fold and 5.6-fold increases versus uRNA and saRNA, respectively. In summary, we have fully optimized the nonviral delivery of mRNA to MSCs, determined the importance of careful selection of the mRNA type used, and highlighted the strong potential of mRNA for tissue engineering applications.

Microfluidics produced ATRA-loaded PLGA NPs reduced tuberculosis burden in alveolar epithelial cells and enabled high delivered dose under simulated human breathing pattern in 3D printed head models.

Tuberculosis, caused by Mycobacterium tuberculosis (Mtb), is second only to COVID-19 as the top infectious disease killer worldwide. Multi-drug resistant TB (MDR-TB) may arise because of poor patient adherence to medications due to lengthy treatment duration and side effects. Delivering novel host directed therapies (HDT), like all trans retinoic acid (ATRA) may help to improve drug regimens and reduce the incidence of MDR-TB. Local delivery of ATRA to the site of infection leads to higher bioavailability and reduced systemic side effects. ATRA is poorly soluble in water and has a short half-life in plasma. Therefore, it requires a formulation step before it can be administered in vivo. ATRA loaded PLGA nanoparticles suitable for nebulization were manufactured and optimized using a scalable nanomanufacturing microfluidics (MF) mixing approach (MF-ATRA-PLGA NPs). MF-ATRA-PLGA NPs demonstrated a dose dependent inhibition of Mtb growth in TB-infected A549 alveolar epithelial cell model while preserving cell viability. The MF-ATRA-PLGA NPs were nebulized with the Aerogen Solo vibrating mesh nebulizer, with aerosol droplet size characterized using laser diffraction and the estimated delivered dose was determined. The volume median diameter (VMD) of the MF-ATRA-PLGA NPs was 3.00 ± 0.18 µm. The inhaled dose delivered in adult and paediatric 3D printed head models under a simulated normal adult and paediatric breathing pattern was found to be 47.05 ± 3 % and 20.15 ± 3.46 % respectively. These aerosol characteristics of MF-ATRA-PLGA NPs supports its suitability for delivery to the lungs via inhalation. The data generated on the efficacy of an inhalable, scalable and regulatory friendly ATRA-PLGA NPs formulation provides a foundation on which further pre-clinical testing can be built. Overall, the results of this project are promising for future research into ATRA loaded NPs formulations as inhaled host directed therapies for TB.

Complexation of histone deacetylase inhibitor belinostat to Cu(II) prevents premature metabolic inactivation in vitro and demonstrates potent anti-cancer activity in vitro and ex vivo in colon cancer.

PURPOSE: The histone deacetylase inhibitor (HDACi), belinostat, has had limited therapeutic impact in solid tumors, such as colon cancer, due to its poor metabolic stability. Here we evaluated a novel belinostat prodrug, copper-bis-belinostat (Cubisbel), in vitro and ex vivo, designed to overcome the pharmacokinetic challenges of belinostat. METHODS: The in vitro metabolism of each HDACi was evaluated in human liver microsomes (HLMs) using mass spectrometry. Next, the effect of belinostat and Cubisbel on cell growth, HDAC activity, apoptosis and cell cycle was assessed in three colon cancer cell lines. Gene expression alterations induced by both HDACis were determined using RNA-Seq, followed by in silico analysis to identify master regulators (MRs) of differentially expressed genes (DEGs). The effect of both HDACis on the viability of colon cancer patient-derived tumor organoids (PDTOs) was also examined. RESULTS: Belinostat and Cubisbel significantly reduced colon cancer cell growth mediated through HDAC inhibition and apoptosis induction. Interestingly, the in vitro half-life of Cubisbel was significantly longer than belinostat. Belinostat and its Cu derivative commonly dysregulated numerous signalling and metabolic pathways while genes downregulated by Cubisbel were potentially controlled by VEGFA, ERBB2 and DUSP2 MRs. Treatment of colon cancer PDTOs with the HDACis resulted in a significant reduction in cell viability and downregulation of stem cell and proliferation markers. CONCLUSIONS: Complexation of belinostat to Cu(II) does not alter the HDAC activity of belinostat, but instead significantly enhances its metabolic stability in vitro and targets anti-cancer pathways by perturbing key MRs in colon cancer. Complexation of HDACis to a metal ion might improve the efficacy of clinically used HDACis in patients with colon cancer.

Development of tissue-engineered tracheal scaffold with refined mechanical properties and vascularisation for tracheal regeneration.

Introduction: Attempted tracheal replacement efforts thus far have had very little success. Major limiting factors have been the inability to efficiently re-vascularise and mimic the mechanical properties of native tissue. The major objective of this study was to optimise a previously developed collagen-hyaluronic acid scaffold (CHyA-B), which has shown to facilitate the growth of respiratory cells in distinct regions, as a potential tracheal replacement device. Methods: A biodegradable thermoplastic polymer was 3D-printed into different designs and underwent multi-modal mechanical assessment. The 3D-printed constructs were incorporated into the CHyA-B scaffolds and subjected to in vitro and ex vivo vascularisation. Results: The polymeric backbone provided sufficient strength to the CHyA-B scaffold, with yield loads of 1.31-5.17 N/mm and flexural moduli of 0.13-0.26 MPa. Angiogenic growth factor release (VEGF and bFGF) and angiogenic gene upregulation (KDR, TEK-2 and ANG-1) was detected in composite scaffolds and remained sustainable up to 14 days. Confocal microscopy and histological sectioning confirmed the presence of infiltrating blood vessel throughout composite scaffolds both in vitro and ex vivo. Discussion: By addressing both the mechanical and physiological requirements of tracheal scaffolds, this work has begun to pave the way for a new therapeutic option for large tracheal defects.

Enhancing arginase 2 expression using target site blockers as a strategy to modulate macrophage phenotype.

Macrophages are plastic cells playing a crucial role in innate immunity. While fundamental in responding to infections, when persistently maintained in a pro-inflammatory state they can initiate and sustain inflammatory diseases. Therefore, a strategy that reprograms pro-inflammatory macrophages toward an anti-inflammatory phenotype could hold therapeutic potential in that context. We have recently shown that arginase 2 (Arg2), a mitochondrial enzyme involved in arginine metabolism, promotes the resolution of inflammation in macrophages and it is targeted by miR-155. Here, we designed and tested a target site blocker (TSB) that specifically interferes and blocks the interaction between miR-155 and Arg2 mRNA, leading to Arg2 increased expression and activity. In bone marrow-derived macrophages transfected with Arg2 TSB (in the presence or absence of the pro-inflammatory stimulus LPS), we observed an overall shift of the polarization status of macrophages toward an anti-inflammatory phenotype, as shown by significant changes in surface markers (CD80 and CD71), metabolic parameters (mitochondrial oxidative phosphorylation) and cytokines secretion (IL-1ß, IL-6, and TNF). Moreover, in an in vivo model of LPS-induced acute inflammation, intraperitoneal administration of Arg2 TSB led to an overall decrease in systemic levels of pro-inflammatory cytokines. Overall, this proof-of-concept strategy represent a promising approach to modulating macrophage phenotype.

Development of Inhalable ATRA-Loaded PLGA Nanoparticles as Host-Directed Immunotherapy against Tuberculosis.

Developing new effective treatment strategies to overcome the rise in multi-drug resistant tuberculosis cases (MDR-TB) represents a global challenge. A host-directed therapy (HDT), acting on the host immune response rather than Mtb directly, could address these resistance issues. We developed an HDT for targeted TB treatment, using All Trans Retinoic Acid (ATRA)-loaded nanoparticles (NPs) that are suitable for nebulization. Efficacy studies conducted on THP-1 differentiated cells infected with the H37Ra avirulent Mycobacterium tuberculosis (Mtb) strain, have shown a dose-dependent reduction in H37Ra growth as determined by the BACT/ALERT® system. Confocal microscopy images showed efficient and extensive cellular delivery of ATRA-PLGA NPs into THP-1-derived macrophages. A commercially available vibrating mesh nebulizer was used to generate nanoparticle-loaded droplets with a mass median aerodynamic diameter of 2.13 µm as measured by cascade impaction, and a volumetric median diameter of 4.09 µm as measured by laser diffraction. In an adult breathing simulation experiment, 65.1% of the ATRA PLGA-NP dose was inhaled. This targeted inhaled HDT could offer a new adjunctive TB treatment option that could enhance current dosage regimens leading to better patient prognosis and a decreasing incidence of MDR-TB.

Modified poly(L-lysine)-based structures as novel antimicrobials for diabetic foot infections, an in-vitro study.

Background: Wound infections occur as sequelae to skin trauma and cause significant hospitalizations, morbidity and mortality. Skin traumas arise more frequently in those with diabetes or cardiovascular disease and in these settings, may be chronic with poorer outcomes including lower limb amputation. Treatment of chronic wound infection is challenging due to antibiotic resistance and biofilm formation by bacteria including S. aureus and P. aeruginosa, which are among the most frequent causative pathogens. Managing these challenging infections requires new molecules and modalities. Methods: We evaluated antimicrobial and anti-biofilm activity of star-shaped poly(L-lysine) (PLL) polymers against S. aureus and P. aeruginosa strains and clinical isolates recovered from wounds including diabetic foot wounds (DFW) in a Dublin Hospital in 2019. A star-shaped PLL polypeptide series, specifically G2(8)PLL 20, G3(16)PLL 10, G4(32)PLL 5 with variation in polypeptide chain length and arm-multiplicity, were compared to a linear peptide, PLL 160 with equivalent number of lysine residues. Results: All PLLs, including the linear polypeptide, were bactericidal at 1µM against S. aureus 25923 and P. aeruginosa PAO1, with log reduction in colony forming units/ml between 2.7-3.6. PLL 160 demonstrated similar killing potency against 20 S. aureus and five P. aeruginosa clinical isolates from DFW, mean log reductions: 3.04 ± 0.16 and 3.96 ± 0.82 respectively after 1 hour incubation. Potent anti-biofilm activity was demonstrated against S. aureus 25923 but for clinical isolates, low to moderate loss of biofilm viability was shown using PLL 160 and G3(16)PLL 10 at 50 µM ( S. aureus) and 200 µM ( P. aeruginosa) with high inter-isolate variability . In the star-shaped architecture, antimicrobial activity was retained with incorporation of 5-mer hydrophobic amino-acid modifications to the arms of the polypeptides (series G3(16)PLL 20-coPLT 5, G3(16)PLL 20-coPLI 5, G3(16)PLL 20-coPLP 5). Conclusion: These polypeptides offer structural flexibility for clinical applications and have potential for further development, particularly in the setting of diabetic foot and other chronic wound infections.

All trans retinoic acid as a host-directed immunotherapy for tuberculosis.

Tuberculosis (TB) is the top bacterial infectious disease killer and one of the top ten causes of death worldwide. The emergence of strains of multiple drug-resistant tuberculosis (MDR-TB) has pushed our available stock of anti-TB agents to the limit of effectiveness. This has increased the urgent need to develop novel treatment strategies using currently available resources. An adjunctive, host-directed therapy (HDT) designed to act on the host, instead of the bacteria, by boosting the host immune response through activation of intracellular pathways could be the answer. The integration of multidisciplinary approaches of repurposing currently FDA-approved drugs, with a targeted drug-delivery platform is a very promising option to reduce the long timeline associated with the approval of new drugs - time that cannot be afforded given the current levels of morbidity and mortality associated with TB infection. The deficiency of vitamin A has been reported to be highly associated with the increased susceptibility of TB. All trans retinoic acid (ATRA), the active metabolite of vitamin A, has proven to be very efficacious against TB both in vitro and in vivo. In this review, we discuss and summarise the importance of vitamin A metabolites in the fight against TB and what is known regarding the molecular mechanisms of ATRA as a host-directed therapy for TB including its effect on macrophages cytokine profile and cellular pathways. Furthermore, we focus on the issues behind why previous clinical trials with vitamin A supplementation have failed, and how these issues might be overcome.

Ion-Triggered Hydrogels Self-Assembled from Statistical Copolypeptides.

Statistical copolypeptides comprising lysine and tyrosine with unprecedented ion-induced gelation behavior are reported. Copolypeptides are obtained by one-step N-carboxyanhydride (NCA) ring-opening polymerization. The gelation mechanism is studied by in situ SAXS analyses, in addition to optical spectroscopy and transmission electron microscopy (TEM). It is found that the gelation of these statistically polymerized polypeptides is due to the formation of stable intermolecular ß-sheet secondary structures induced by the presence of salt ions as well as the aggregation of an α-helix between the copolypeptides. This behavior is unique to the statistical lysine/tyrosine copolypeptides and was not observed in any other amino acid combination or arrangement. Furthermore, the diffusion and mechanical properties of these hydrogels can be tuned through tailoring the polypeptide chain length and ion strength.

Systematic Study of Enzymatic Degradation and Plasmid DNA Complexation of Mucus Penetrating Star-Shaped Lysine/Sarcosine Polypept(o)ides with Different Block Arrangements.

8-Arm star polypep(o)ides comprising cationic polylysine and hydrophilic polysarcosine blocks with a degree of polymerization (DP) of 30 per block are synthesized. Two different block sequences with polylysine as the inner and polysarcosine as the outer block and vice versa are obtained in addition to a statistical copolymer. Analysis of the enzymatic hydrolysis by the proteolytic enzyme trypsin demonstrates a strong dependence on structural arrangements. While polypept(o)ide disintegration is detectible after 24 h by Size Exclusion Chromatography (SEC), significant hydrolysis of the lysine blocks is only monitored after 48 h by fluorescamine labeling of the produced lysine and clearly accelerated in structures with more accessible polylysine blocks. All structures are capable of complexing plasmid DNA and form gene nanomedicines at sizes around or below 200 nm as determined by Dynamic Light Scattering (DLS), Nanoparticle Tracking Analysis (NTA), and Transition Electron Microscopy (TEM). The polyplex formation is slightly enhanced for both block structures over the random copolypept(o)ide. Moreover, it is demonstrated that the polyplexes can transport through mucus. The results highlight the importance of structural control in compartmentalized polymeric gene vector candidates with hydrophilic domains for potential mucosal delivery.

Development and clinical translation of tubular constructs for tracheal tissue engineering: a review.

Effective restoration of extensive tracheal damage arising from cancer, stenosis, infection or congenital abnormalities remains an unmet clinical need in respiratory medicine. The trachea is a 10-11 cm long fibrocartilaginous tube of the lower respiratory tract, with 16-20 tracheal cartilages anterolaterally and a dynamic trachealis muscle posteriorly. Tracheal resection is commonly offered to patients suffering from short-length tracheal defects, but replacement is required when the trauma exceeds 50% of total length of the trachea in adults and 30% in children. Recently, tissue engineering (TE) has shown promise to fabricate biocompatible tissue-engineered tracheal implants for tracheal replacement and regeneration. However, its widespread use is hampered by inadequate re-epithelialisation, poor mechanical properties, insufficient revascularisation and unsatisfactory durability, leading to little success in the clinical use of tissue-engineered tracheal implants to date. Here, we describe in detail the historical attempts and the lessons learned for tracheal TE approaches by contextualising the clinical needs and essential requirements for a functional tracheal graft. TE manufacturing approaches explored to date and the clinical translation of both TE and non-TE strategies for tracheal regeneration are summarised to fully understand the big picture of tracheal TE and its impact on clinical treatment of extensive tracheal defects.

An Automated Culture System for Use in Preclinical Testing of Host-Directed Therapies for Tuberculosis.

Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis (TB), was the most significant infectious disease killer globally until the advent of COVID-19. Mtb has evolved to persist in its intracellular environment, evade host defenses, and has developed resistance to many anti-tubercular drugs. One approach to solving resistance is identifying existing approved drugs that will boost the host immune response to Mtb. These drugs could then be repurposed as adjunctive host-directed therapies (HDT) to shorten treatment time and help overcome antibiotic resistance. Quantification of intracellular Mtb growth in macrophages is a crucial aspect of assessing potential HDT. The gold standard for measuring Mtb growth is counting colony-forming units (CFU) on agar plates. This is a slow, labor-intensive assay that does not lend itself to rapid screening of drugs. In this protocol, an automated, broth-based culture system, which is more commonly used to detect Mtb in clinical specimens, has been adapted for preclinical screening of host-directed therapies. The capacity of the liquid culture assay system to investigate intracellular Mtb growth in macrophages treated with HDT was evaluated. The HDTs tested for their ability to inhibit Mtb growth were all-trans Retinoic acid (AtRA), both in solution and encapsulated in poly(lactic-co-glycolic acid) (PLGA) microparticles and the combination of interferon-gamma and linezolid. The advantages of this automated liquid culture-based technique over the CFU method include simplicity of setup, less labor-intensive preparation, and faster time to results (5-12 days compared to 21 days or more for agar plates).

Three-dimensionally printable shear-thinning triblock copolypeptide hydrogels with antimicrobial potency.

Through rational design, block sequence controlled triblock copolypeptides comprising cysteine and tyrosine as well as a lysine or glutamic acid central block are devised. In these copolypeptides, each block contributes a specific property to the hydrogels to render them extrusion printable and antimicrobial. Three-dimensional (3D) printing of complex hydrogel structures with high shape retention is demonstrated. Moreover, composition dependent potent antimicrobial activity in contact-killing assays is elucidated.

A Tissue-Engineered Tracheobronchial In Vitro Co-Culture Model for Determining Epithelial Toxicological and Inflammatory Responses.

Translation of novel inhalable therapies for respiratory diseases is hampered due to the lack of in vitro cell models that reflect the complexity of native tissue, resulting in many novel drugs and formulations failing to progress beyond preclinical assessments. The development of physiologically-representative tracheobronchial tissue analogues has the potential to improve the translation of new treatments by more accurately reflecting in vivo respiratory pharmacological and toxicological responses. Herein, advanced tissue-engineered collagen hyaluronic acid bilayered scaffolds (CHyA-B) previously developed within our group were used to evaluate bacterial and drug-induced toxicity and inflammation for the first time. Calu-3 bronchial epithelial cells and Wi38 lung fibroblasts were grown on either CHyA-B scaffolds (3D) or Transwell® inserts (2D) under air liquid interface (ALI) conditions. Toxicological and inflammatory responses from epithelial monocultures and co-cultures grown in 2D or 3D were compared, using lipopolysaccharide (LPS) and bleomycin challenges to induce bacterial and drug responses in vitro. The 3D in vitro model exhibited significant epithelial barrier formation that was maintained upon introduction of co-culture conditions. Barrier integrity showed differential recovery in CHyA-B and Transwell® epithelial cultures. Basolateral secretion of pro-inflammatory cytokines to bacterial challenge was found to be higher from cells grown in 3D compared to 2D. In addition, higher cytotoxicity and increased basolateral levels of cytokines were detected when epithelial cultures grown in 3D were challenged with bleomycin. CHyA-B scaffolds support the growth and differentiation of bronchial epithelial cells in a 3D co-culture model with different transepithelial resistance in comparison to the same co-cultures grown on Transwell® inserts. Epithelial cultures in an extracellular matrix like environment show distinct responses in cytokine release and metabolic activity compared to 2D polarised models, which better mimic in vivo response to toxic and inflammatory stimuli offering an innovative in vitro platform for respiratory drug development.

Gene activated scaffolds incorporating star-shaped polypeptide-pDNA nanomedicines accelerate bone tissue regeneration in vivo.

Increasingly, tissue engineering strategies such as the use of biomaterial scaffolds augmented with specific biological cues are being investigated to accelerate the regenerative process. For example, significant clinical challenges still exist in efficiently healing large bone defects which are above a critical size. Herein, we describe a cell-free, biocompatible and bioresorbable scaffold incorporating a novel star-polypeptide biomaterial as a gene vector. This gene-loaded scaffold can accelerate bone tissue repair in vivo in comparison to a scaffold alone at just four weeks post implantation in a critical sized bone defect. This is achieved via the in situ transfection of autologous host cells which migrate into the implanted collagen-based scaffold via gene-loaded, star-shaped poly(l-lysine) polypeptides (star-PLLs). In vitro, we demonstrate that star-PLL nanomaterials designed with 64 short poly(l-lysine) arms can be used to functionalise a range of collagen based scaffolds with a dual therapeutic cargo (pDual) of the bone-morphogenetic protein-2 plasmid (pBMP-2) and vascular endothelial growth factor plasmid (pVEGF). The versatility of this polymeric vector is highlighted in its ability to transfect Mesenchymal Stem Cells (MSCs) with both osteogenic and angiogenic transgenes in a 3D environment from a range of scaffolds with various macromolecular compositions. In vivo, we demonstrate that a bone-mimetic, collagen-hydroxyapatite scaffold functionalized with star-PLLs containing either 32- or 64- poly(l-lysine) arms can be used to successfully deliver this pDual cargo to autologous host cells. At the very early timepoint of just 4 weeks, we demonstrate the 64-star-PLL-pDual functionalised scaffold as a particularly efficient platform to accelerate bone tissue regeneration, with a 6-fold increase in new bone formation compared to a scaffold alone. Overall, this article describes for the first time the incorporation of novel star-polypeptide biomaterials carrying two therapeutic genes into a cell free scaffold which supports accelerated bone tissue formation in vivo.

Translational Studies on the Potential of a VEGF Nanoparticle-Loaded Hyaluronic Acid Hydrogel.

Heart failure has a five-year mortality rate approaching 50%. Inducing angiogenesis following a myocardial infarction is hypothesized to reduce cardiomyocyte death and tissue damage, thereby preventing heart failure. Herein, a novel nano-in-gel delivery system for vascular endothelial growth factor (VEGF), composed of star-shaped polyglutamic acid-VEGF nanoparticles in a tyramine-modified hyaluronic acid hydrogel (nano-VEGF-HA-TA), is investigated. The ability of the nano-VEGF-HA-TA system to induce angiogenesis is assessed in vivo using a chick chorioallantoic membrane model (CAM). The formulation is then integrated with a custom-made, clinically relevant catheter suitable for minimally invasive endocardial delivery and the effect of injection on hydrogel properties is examined. Nano-VEGF-HA-TA is biocompatible on a CAM assay and significantly improves blood vessel branching (p < 0.05) and number (p < 0.05) compared to a HA-TA hydrogel without VEGF. Nano-VEGF-HA-TA is successfully injected through a 1.2 m catheter, without blocking or breaking the catheter and releases VEGF for 42 days following injection in vitro. The released VEGF retains its bioactivity, significantly improving total tubule length on a Matrigel® assay and human umbilical vein endothelial cell migration on a Transwell® migration assay. This VEGF-nano in a HA-TA hydrogel delivery system is successfully integrated with an appropriate device for clinical use, demonstrates promising angiogenic properties in vivo and is suitable for further clinical translation.

Antimicrobial and degradable triazolinedione (TAD) crosslinked polypeptide hydrogels.

Hydrogels are perfectly suited to support cell and tissue growth in advanced tissue engineering applications as well as classical wound treatment scenarios. Ideal hydrogel materials for these applications should be easy to produce, biocompatible, resorbable and antimicrobial. Here we report the fabrication of degradable covalent antimicrobial lysine and tryptophan containing copolypeptide hydrogels, whereby the hydrogel properties can be independently modulated by the copolypeptide monomer ratio and chiral composition. Well-defined statistical copolypeptides comprising different overall molecular weights as well as ratios of l- and d-lysine and tryptophan at ratios of 35 : 15, 70 : 30 and 80 : 20 were obtained by N-carboxyanhydride (NCA) polymerisation and subsequently crosslinked by the selective reaction of bifunctional triazolinedione (TAD) with tryptophan. Real-time rheology was used to monitor the crosslinking reaction recording the fastest increase and overall modulus for copolypeptides with the higher tryptophan ratio. Water uptake of cylindrical hydrogel samples was dependent on crosslinking ratio but found independent of chiral composition, while enzymatic degradation proceeded significantly faster for samples containing more l-amino acids. Antimicrobial activity on a range of hydrogels containing different polypeptide chain lengths, lysine/tryptophan composition and l/d enantiomers was tested against reference laboratory strains of Gram-negative Escherichia coli (E. coli; ATCC25922) and Gram-positive, Staphylococcus aureus (S. aureus; ATCC25923). log reductions of 2.8-3.4 were recorded for the most potent hydrogels. In vitro leachable cytotoxicity tests confirmed non-cytotoxicity as per ISO guidelines.

Development of collagen-poly(caprolactone)-based core-shell scaffolds supplemented with proteoglycans and glycosaminoglycans for ligament repair.

Core-shell scaffolds offer a promising regenerative solution to debilitating injuries to anterior cruciate ligament (ACL) thanks to a unique biphasic structure. Nevertheless, current core-shell designs are impaired by an imbalance between permeability, biochemical and mechanical cues. This study aimed to address this issue by creating a porous core-shell construct which favors cell infiltration and matrix production, while providing mechanical stability at the site of injury. The developed core-shell scaffold combines an outer shell of electrospun poly(caprolactone) fibers with a freeze-dried core of type I collagen doped with proteoglycans (biglycan, decorin) or glycosaminoglycans (chondroitin sulphate, dermatan sulphate). The aligned fibrous shell achieved an elastic modulus akin of the human ACL, while the porous collagen core is permeable to human mesenchymal stem cell (hMSC). Doping of the core with the aforementioned biomolecules led to structural and mechanical changes in the pore network. Assessment of cellular metabolic activity and scaffold contraction shows that hMSCs actively remodel the matrix at different degrees, depending on the core's doping formulation. Additionally, immunohistochemical staining and mRNA transcript levels show that the collagen-chondroitin sulphate formulation has the highest matrix production activity, while the collagen-decorin formulation featured a matrix production profile more characteristic of the undamaged tissue. Together, this demonstrates that scaffold doping with target biomolecules leads to distinct levels of cell-mediated matrix remodeling. Overall, this work resulted in the development of a versatile and robust platform with a combination of mechanical and biochemical features that have a significant potential in promoting the repair process of ACL tissue.

Biocompatible polypeptide-based interpenetrating network (IPN) hydrogels with enhanced mechanical properties.

Hydrogels are widely used for biomedical applications such as drug delivery, tissue engineering, or wound healing owing to their mimetic properties in relation to biological tissues. The generation of peptide-based hydrogels is a topic of interest due to their potential to increase biocompatibility. However, their usages can be limited when compared to other synthetic hydrogels because of their inferior mechanical properties. Herein, we present the synthesis of novel synthetic polypeptide-based interpenetrating network (IPN) hydrogels with enhanced mechanical properties. The polypeptide single network is obtained from alkyne functional polypeptides crosslinked with di, tri and tetra azide functional PEG by copper-catalysed alkyne-azide cycloaddition (CuAAC). Interpenetrating networks were subsequently obtained by loading of the polypeptide single network with PEG-dithiol and orthogonally UV-crosslinking with varying molar ratios of pentaerythritol tetraacrylate. The characteristics, including the mechanical strength (i.e. compressive strength (UCS), fracture strain (εbreak), and Young's modulus (E)) and cell compatibility (i.e. metabolic activity and Live/Dead of human Mesenchymal Stem Cells), of each synthetic polypeptide-based IPN hydrogel were studied and evaluated in order to demonstrate their potential as mechanically robust hydrogels for use as artificial tissues. Moreover, 1H NMR diffusometry was carried out to examine the water mobility (DH2O) within the polypeptide-based hydrogels and IPNs. It was found that both the mechanical and morphological properties could be tailored concurrently with the hydrophilicity, rate of water diffusion and 'swellability'. Finally it was shown that the polypeptide-based IPN hydrogels exhibited good biocompatibility, highlighting their potential as soft tissue scaffolds.

In Vitro and In Vivo Assessment of PEGylated PEI for Anti-IL-8/CxCL-1 siRNA Delivery to the Lungs.

Inhalation offers a means of rapid, local delivery of siRNA to treat a range of autoimmune or inflammatory respiratory conditions. This work investigated the potential of a linear 10 kDa Poly(ethylene glycol) (PEG)-modified 25 kDa branched polyethyleneimine (PEI) (PEI-LPEG) to effectively deliver siRNA to airway epithelial cells. Following optimization with anti- glyceraldehyde 3-phosphate dehydrogenase (GAPDH) siRNA, PEI and PEI-LPEG anti-IL8 siRNA nanoparticles were assessed for efficacy using polarised Calu-3 human airway epithelial cells and a twin stage impinger (TSI) in vitro lung model. Studies were then advanced to an in vivo lipopolysaccharide (LPS)-stimulated rodent model of inflammation. In parallel, the suitability of the siRNA-loaded nanoparticles for nebulization using a vibrating mesh nebuliser was assessed. The siRNA nanoparticles were nebulised using an Aerogen® Pro vibrating mesh nebuliser and characterised for aerosol output, droplet size and fine particle fraction. Only PEI anti-IL8 siRNA nanoparticles were capable of significant levels of IL-8 knockdown in vitro in non-nebulised samples. However, on nebulization through a TSI, only PEI-PEG siRNA nanoparticles demonstrated significant decreases in gene and protein expression in polarised Calu-3 cells. In vivo, both anti-CXCL-1 (rat IL-8 homologue) nanoparticles demonstrated a decreased CXCL-1 gene expression in lung tissue, but this was non-significant. However, PEI anti-CXCL-1 siRNA-treated rats were found to have significantly less infiltrating macrophages in their bronchoalveolar lavage (BAL) fluid. Overall, the in vivo gene and protein inhibition findings indicated a result more reminiscent of the in vitro bolus delivery rather than the in vitro nebulization data. This work demonstrates the potential of nebulised PEI-PEG siRNA nanoparticles in modulating pulmonary inflammation and highlights the need to move towards more relevant in vitro and in vivo models for respiratory drug development.